install openwrt – Farlock.org https://www.farlock.org What you want to hack today? Wed, 02 Apr 2014 06:10:22 +0000 en-US hourly 1 https://wordpress.org/?v=6.0 Install OpenWrt on Nslu2 https://www.farlock.org/nslu2/install-openwrt-on-nslu2/ https://www.farlock.org/nslu2/install-openwrt-on-nslu2/#respond Wed, 03 Sep 2008 11:05:22 +0000 http://farlock.wallweb.net/?p=20
  • Download latest version of openwrt binaries from http://www.slug-firmware.net/ (or http://downloads.openwrt.org/snapshots/ixp4xx/openwrt-ixp4xx-squashfs.img for development version)
  • Install UpSlug2 (utility to upgrade the firmware of a LinkSys NSLU2 via the network), into Debian-based system, simply type “apt-get install upslug2”
  • Put Nslu2 in upgrade mode (hold-on the reset switch, turn-on the nslu2, wait 10 seconds until “Ready/Status” led blink alternatively red/green, release reset switch)
  • Connect network cable 😉
  • On command line type: upslug2 – you should receive an output similar to this one:

    • etch:~/nslu2/709# upslug2
    NSLU2     00:14:bf:70:dc:86 Product ID: 1 Protocol ID: 0 Firmware Version: R23V63 [0x2363]

    • Now upload the downloaded image:

    etch:~/nslu2/709# upslug2 -i openwrt-kamikaze-7.09-nslu2.bin

    • The ouput should end with:

    Rebooting… done

    • Now, if you have a DHCP server enabled on your network, Nslu2 take IP address from it.
    ]]>     https://www.farlock.org/nslu2/install-openwrt-on-nslu2/feed/ 0